FEATURES

Large Branding Area
Bluetooth® Connection
3.5mm AUX Input
Superb Sound Quality
Built-in Bass Enhancer
Built-in Rechargeable Battery (via USB)
NFC™ Pairing Function
Speakerphone Function
Micro-USB and AUX multi-cable and instructions included


SPECIFICATIONS

Cable: 80cm Micro-USB
Battery Type: A-Grade Lithium-ion
Circuit Board: A-Grade
Unit Size: 80x80x63mm
Weight: 180g
Finish: Soft touch matt finish with silver trim
Bluetooth® Connection: v3.0
Pairing Memory: 4 devices
Driver: 50mm diameter
Amplifier Output: 2.2-2.7W
Playback Time: ~10 hours (fully charged, volume at 33%)
Standby Time: Up to 18 hours
Packaging: Supplied in silver gift box as standard
Packaging Size: 87x87x72mm
Commodity Code: 8518210000
Automatic Short Circuit and Surge Protection Built-In, Keeping You Safe.
Power Indicator.

Optional Extras

• iPhone 4 30-pin cable
• iPhone 5/6 Lightning cable
PowerLink Multi-Cable


STANDARD CHARGE TIMES

Recharge Time: Approximately 1.5 hours

USAGE GUIDE

Charging Your Unit

Using the Micro-USB cable provided, plug the speaker into a USB port capable of charging. The unit's red light will turn on to signify that it is now charging. It takes approximately 1.5 hours to fully charge. Once fully charged, the light on the unit will turn blue.

Pairing With Your Device

NFC™ Pairing
a) Slide the switch on the speaker to [BT] to turn it on.
b) Hold your smart phone on top of the speaker. A ‘cling’ tone will play when the speaker is found, and a ‘bloop’ tone will play to signify a successful pairing. This will also be indicated by the LED flashing slowly.

Manual Pairing
a) Slide the switch on the speaker to [BT] to turn it on.
b) The LED will turn on indicating power. On first use, this will be flashing quickly to show it is ready for pairing.
c) Using your phone, search for Bluetooth devices, and select the device named ‘PowerVibe’ to pair with it. You will hear a ‘beep’ tone on your speaker and the LED will flash slowly indicating a successful pairing.

Disconnecting From The Speaker

a) When you need to disconnect from the unit, first turn off the Bluetooth function on your phone.
b) Slide the switch on the speaker to [OFF]. This pairing will be remembered and will re-pair automatically when both devices are ready and close by.
c) If you need to pair with a new device, first turn off the Bluetooth function of the original device, and turn on the Bluetooth function of the new device. Then slide the switch on the speaker to [BT], and the LED should begin to flash quickly. From this state, you can pair your new device with the speaker using step 1.

Speakerphone Function

When your device and speaker are connected, whenever an incoming call is received you can select to pick up your phone as usual, or choose to use the speaker as a speakerphone.

Controls

• To change volume and select songs etc. is operated by using your smartphone.
• Audio input can be changed to use a 3.5mm AUX cable by sliding the switch on the bottom of the speaker to [AUX].
• If the battery becomes low on charge, the speaker will make ‘beep’ tones, and the LED will begin to flash red and blue. The speaker can continue to be used whilst charging.


TROUBLESHOOTING GUIDE

Problems Charging The Unit

If the light doesn't turn on after plugging it in...
• Make sure the USB output of your computer or other device supports charging, some USB ports, particularly on older devices, do not output power and therefore can not charge the unit. Try charging from a different device.
• Make sure you are using the provided Micro-USB charging cabled. If the unit is not charging using this cable, try an alternative cable to discover if this is the problem.
• If you are not using the provided charging cable, make sure the cable you are using supports charging, some Micro-USB cabled supplied with mobile phones or other devices will only charge particular devices.

BRANDING

Packaging: Supplied in silver gift box as standard
Type: Resin Dome Decal
Decal Size: 70mm diameter circle
Colours: Black or White

WARRANTY DISCLAIMER

All products are generally guaranteed to be free from defects within 1 year after delivery to your supplier. This means although 1 year warranty is offered on your unit, you will need to contact your supplier for the exact warranty date. Due to these procedures we generally offer an extra month on the warranty to account for possible delays in the unit reaching the end user.

The unit is covered for any defects within this warranty period with the exception of general wear and tear caused by frequent use.

We will cover any defect in the LED or LID systems due to wiring faults, soldering faults or casing deformations. If an international short circuit or intentional malicious damage is found the unit is not covered under warranty.

Units that have been opened by any part or accidently damaged by any users or suppliers are not covered.